Standard Radio Fence Contain & Train Containment Plus Remote Training with 1500 Feet of Wire

Features:

• Protection against false activation
• Ideal for small to medium-sized dogs
• Veterinarian recommended and approved
• Includes 1500 feet of wire and 150 boundary flags
• Two levels of correction for the remote training mode
• Built-in lightning and surge protection for storm-prone areas
• Pet containment and remote training capabilities all in one system
• Easy-to-follow owners manual covering installation and pet training
• Keep your dog or cat in your yard and train him not to dig, bark or chew
• Operate with one receiver collar - no need to switch receivers or collars
• Ultralight receiver uses a 6 Volt battery module that ensures a waterproof seal
• Receiver fail-safe - receiver will shut down after 20 seconds to protect your pet
• Loop indicator light and audible break alarm warns you if the wire has been broke

How It Works:

A radio signal is sent by the transmitter to a receiver on your dog's collar. The signal is transmitted through a wire which is placed along the boundaries you want to establish. The wire is really an antenna that carries the signal. You can adjust the signal to up to 15 feet from the wire. In most cases, a 4-6 foot signal field will be the best for optimal training. The receiver provides a warning beep as your dog approaches the wire. If he starts to cross the wire, he will receive a mild correction. Although the correction is harmless, it will dissuade him from continuing.

When using the remote, the fence transmitter floods the area inside the boundary wire with the signal and this activates the receiver. All receivers within the boundary will activate when the remote is used. If you have more than one dog, you may want to remove the receiver from the other dogs so they do not get a correction.